Scottish Elises

Im selling my engine and gearbox setup. Heres the spec: ENGINE: Elise 111S 143 VVC engine (56k) running Emerald K3 ECU (Mapped by dave Walker himself) 2001 Lotus Exige throttle bodies/ airbox ITG trumpet filter 340R exhaust manifold heatwrapped Piper cams exhaust camshaft DVA power 8degree offset do...

Im after a single vernier pulley for my VVC, let me know if you have one i can buy.

May buy a pair if you dont want to split.

Thanks.

I believe the 1.8T engine has slightly shorter rods to lower the compression, other than that i think the head will be a standard 1.8K. Can i ask what was all coming with the engine? I wouldn't mind having the bottom end and exhaust manifold/ turbo to mess about with! If you buy the engine for the h...

Tut talketh some truth ;) Most people would only consider the TB route after going big guns on the head, but I've not chosen to do that. The engine i bought (VVC, standard) came with an Emerald dyno readout of 167 bhp on a 4-2-1 & I had the TB's & ECU anyway. Bolted on my 4-2-1, TB's and Emerald & ...

The EU2 engine's have the coil packs on the rear of the block, 99% of these are the 143bhp engine. (Red and black plugs on ECU) The EU3 engine's have 2 coil's mounted on top of the plug's, each coil fire's 2 plug's. These are 160bhp ensine's. I have recently heard there was a very small amount of 14...

I have it all wired now for the VVC and it has ran for a few seconds with whatever map is in it at the moment. (Not even a VVC one!) I had originally changed the injector wiring from sequential to paired on Dave Andrew's advice (He accidently gave me the wrong wiring i think), but it's now back to s...

My Emerald is a K3. :P I have the Emerald pin-out in my manual but i dont know where the VVC solenoids go to. Dave Andrews has gave me the info on another forum just now, hopefully ill get it all wired. As for sequential injection, why would i benefit from this? Is there more power to be had? I thou...

Hi guy's, i have a VVC which im fitting an Emerald to. It's the MEM's 2j one with red and black plug. First off, if anyone has or knows of the conversion data between a VVC and Emerald id love to see it and would even give beer tokens for it! I have most of it wired but i have the following queries:...

Hi folk's, i've fitted a Torsen T-2 (Type B) limited slip diff to my gearbox and im not sure what oil would be the best. I know you get different oil for LSD gearboxes but which is best? Also, i see in Demon Tweeks that there is LSD gear oil and also a seperate bottle of fluid that can be added to c...

Anyone got one i can swap some hard earned for?

My EU2 VVC pistons are going to be used in a (approx) 200bhp throttle-body conversion soon!

£30 for a VVC head is stupidly cheap! Where was that from, i may want the block/ pistons etc!

The silver motion picture next to the 'Scottish Elises' at the top of the page!

Who's is this and can i get the full size picture!?

It's a brilliant picture and the car look's amazing, enough to make anyone want an Elise!

Thanks.

Hi guy's, after one of these please.

Anyone have one for sale?

Here's a picture of what i mean:


Easiest to Email me at Gaz-M@hotmail.co.uk

Thanks.

Hi guy's, i have the rare turbo 56mm throttle body ive had on my VVC. It's a Turbo one so has the right throttle sensor, not like most which will eventually cause damage to your engine! It also has the K series cable lobe, cable mount, a throttle stop, polished aluminium blank plate, idle valve take...

I have a 2" diameter flexy pipe which i intended using on my 160 manifold but didnt need it..

I can measure its length if you like as its just a random one from the local factors..