Scottish Elises

Seats Dropped Off Today

Thanks

Andy

Trying to locate either Scottish location, for seat re-trim, or supplier of the black material.

I have had some quotes from down south, but a bit OTT for me.

Tried using the search, but if anyone can suggest local that would be great.

Andy

One bolt can't get too, the one nearest the rear, that clamps the mounting plate to G/Box.
Any advice, from someone who has changed this with Clam fitted and without major dismantling.

Andy

Thanks Steviej I found this: If accurate would need ecu and all the other stuff to allow VVT. So may not be a good idea AUQ is 06A, small ports head. AJQ is also 06A, not sure about the head, I think it is small ports too. Differences that I know of: Wrist pins: AUQ - 19 mm AJQ - 20 mm Variable valv...

1999 1.8 T Engine code AJQ, ran short of oil.

2005 same engine but code is AUQ, both have drive by throttle, question is:

Fairly straight forward swap, does anyone know.

Thanks in advance

Andy

Hi,

Just loged on to update they want £64 !

I just need uk, any other options ?

Ta

Andy

Hi, My daughters A3 1.6 engine code BFQ "overheated" Temp Gauge 120 Deg C flashing light stopped immediately. Thermostate appeard jammed shut, poor circulation through the Rad. No heat from the heater. Suspect water pump ?? Changed the Temp Sender, as when Ign is switched on it reads 70 Deg even if ...

Not sure if you have got the nut off ?

I cut a 12mm Alen key and welded it to the nut, and used a socket on the cut Alen key off it came.

Hi, Ferry Booked Travel Wednesday 16 March to Newcastle [ferry goes at 17:00] overnight to Amsterdam, dinner booked @ 19:00. Return 19Th leaving at 17:30 overnight, dinner at 20:30 back in Newcastle 09:30 Sun 20Th. Staying in the Hotel de la Source for two nights. See http://www.hotel-de-la-source.c...

Great,

I’m trying to sort out a passenger [to split the cost] we can decide nearer the time if we should meet up and travel down the A1 on the Wednesday.

Andy

Booked the Ferry from Newcastle.

Spoke to Hotel, trying to sort out the Lotus room rate, so that should be sorted tommorow.

Looking forward to the trip

Andy

This Sound Good.

Trying to send a pm, appears to be stuck in "outbox" Ive checked and deleted old items, so that's not the issue.

Anyone else had same pm issue, if so what do you do ?

Andy H

Hi,

I have opened up a C.R box and have a standard one as well. I am going to swap over the 5Th gear.

Which one is the 5Th Gear ?

Thanks

Andy

Mr Haynes shows the above with holes in it to allow a tool to be inserted when undoing the centre tight bolt.
My pully does not have any holes to help.

Any good sugestions ?

Andy H

Thanks,

Stero out, has a large Yellow double spade that I can fit a bullet connecter onto and run a cable.

Andy