what can SE members do to help eachother out?

ninja · Post by **ninja** » Thu May 11, 2006 1:48 pm

graham,

who do you work for mate? my gf works for harper macleod and my cousin works for burness

ninja

rossybee · Post by **rossybee** » Thu May 11, 2006 1:57 pm

mrbennybennett wrote:
rossybee wrote:
mrbennybennett wrote:Im a Chartered Surveyor so if you need houses, flat, shops, offices etc valued let me know - we have 26 offices across Scotland so everywhere covered
You don't work for G&S by any chance?
Ross i work for their rivals - J & E Shepherd, good Dundee based company

Anthony (Dundee born faction)

(penny drops)

Your father wouldn't happen to be called John by any chance & live in Broughty Ferry?

My Bro-in-Law is Graham Tonner (ex-Shepherds, now G&S), I suspect you may know him

jj · Post by jj » Thu May 11, 2006 2:02 pm

As most may know, I am an interior designer and I do residential work mainly.

Can source / supply anything for the home from appliances to lighting / fabrics / wallpapers and furniture.

Do the lot from beds at a few hundred quid to Armani gear at 5k, so if you are doing anything in the house let me know and I`ll be able to help.....

Post by **pete** » Thu May 11, 2006 2:02 pm

I stop aeroplanes bumping into each other. Not exactly a transferrable skill, I suppose if there were a lot of car parking to be orgainsed, and they would all be going really quickly, and you wanted them kept a long way apart I may be of use.

Pete

mrbennybennett · Post by **mrbennybennett** » Thu May 11, 2006 2:10 pm

rossybee wrote:
mrbennybennett wrote:
rossybee wrote: You don't work for G&S by any chance?
Ross i work for their rivals - J & E Shepherd, good Dundee based company

Anthony (Dundee born faction)
(penny drops)

Your father wouldn't happen to be called John by any chance & live in Broughty Ferry?

My Bro-in-Law is Graham Tonner (ex-Shepherds, now G&S), I suspect you may know him

Got it in one - I used to do work experience in the Dundee office when I was at school and I used to go out on survey with Graham - great lad

Yip my old man lives next to the woodland s hotel in the Ferry - drives a Jag with the reg R9 JMB

Anthony

rossybee · Post by **rossybee** » Thu May 11, 2006 2:16 pm

...and happens to be head honcho

My old man knows yours, typical Dundee, eh?

ninja · Post by **ninja** » Thu May 11, 2006 2:21 pm

jke11y wrote:As most may know, I am an interior designer and I do residential work mainly.

Can source / supply anything for the home from appliances to lighting / fabrics / wallpapers and furniture.

Do the lot from beds at a few hundred quid to Armani gear at 5k, so if you are doing anything in the house let me know and I`ll be able to help.....

would now be a good time to mention i've just bought a new house and have a budget of 8k to decorate and buy a big tv?

know any landscape gardeners - got a budget of 1k for a new back garden

ninja:drive

Titanium S1 111S (gla) · Post by **Titanium S1 111S (gla)** » Thu May 11, 2006 2:29 pm

Ninja,

Iâ€™m with McClure Naismith (Glasgow Office) pm me the names, might just know them.

G

woody · Post by **woody** » Thu May 11, 2006 2:41 pm

Well if anyone needs a CF6 jet engine overhauled, give me a shout

I can get wee one off jobs done on the mills and/or lathes usually, as well as grit blasting and painting (but only in spinner cone black) which can be handy. Also can get P clips nuts and bolts, all to aerospace spec.

tenkfeet · Post by **tenkfeet** » Thu May 11, 2006 2:47 pm

jke11y wrote:As most may know, I am an interior designer and I do residential work mainly.

Can source / supply anything for the home from appliances to lighting / fabrics / wallpapers and furniture.

Do the lot from beds at a few hundred quid to Armani gear at 5k, so if you are doing anything in the house let me know and I`ll be able to help.....

I need to do up my house at some point but have absolutely no interest in it whatsoever. Kitchen Bathroom the works . When I get the cash I will look you up. Or I could just Honda my car and live in a hovel.

The_Rossatron · Post by **The_Rossatron** » Thu May 11, 2006 2:50 pm

um I help make games, so if anyone needs a very small fraction of one designed I can help.

Could maybe get people a discount at pizza hut, ok I'm struggling.

tenkfeet · Post by **tenkfeet** » Thu May 11, 2006 2:52 pm

woody wrote:Well if anyone needs a CF6 jet engine overhauled, give me a shout

I can get wee one off jobs done on the mills and/or lathes usually, as well as grit blasting and painting (but only in spinner cone black) which can be handy. Also can get P clips nuts and bolts, all to aerospace spec.

Do you work at GE ( Think thats what its called) at Prestwick used to be Caledonian Airmotive I think? If so do you know a guy Musky a plasma sprayer ?

woody · Post by **woody** » Thu May 11, 2006 3:21 pm

tenkfeet wrote:
woody wrote:Well if anyone needs a CF6 jet engine overhauled, give me a shout

I can get wee one off jobs done on the mills and/or lathes usually, as well as grit blasting and painting (but only in spinner cone black) which can be handy. Also can get P clips nuts and bolts, all to aerospace spec.
Do you work at GE ( Think thats what its called) at Prestwick used to be Caledonian Airmotive I think? If so do you know a guy Musky a plasma sprayer ?

Aye, thats where i am. Don't know this Musky fellow though, i'm not in Plasma much.

tut · Post by **tut** » Thu May 11, 2006 3:23 pm

My main training was to kill people as quickly and quietly as possible, so not a lot of use in civilian life, nor I suppose was being able to fly most helicopters, and a few military fixed wing.

However I make the best pepper steak in the world, and know my wines, so I could always act as your butler/chef if you were trying to impress business clients, or better still, a bit of tottie...........

tut

tenkfeet · Post by **tenkfeet** » Thu May 11, 2006 3:25 pm

woody wrote:
tenkfeet wrote:
woody wrote:Well if anyone needs a CF6 jet engine overhauled, give me a shout

I can get wee one off jobs done on the mills and/or lathes usually, as well as grit blasting and painting (but only in spinner cone black) which can be handy. Also can get P clips nuts and bolts, all to aerospace spec.
Do you work at GE ( Think thats what its called) at Prestwick used to be Caledonian Airmotive I think? If so do you know a guy Musky a plasma sprayer ?
Aye, thats where i am. Don't know this Musky fellow though, i'm not in Plasma much.

I think he keeps his head down . How about Ian Johansen (Spelling) ?