The place to "speak geek"
-
Scottd
- Posts: 964
- Joined: Thu Mar 10, 2005 1:26 am
- Location: Dundee
Post
by Scottd » Sun Mar 02, 2008 3:24 pm
When I start the car its sounding like the starter motor's not disengaging quickly enough. So it makes that noise you get if you turn the ignition when the engine is already running.
Do I need a new starter motor or might it just need taken off and oiled a bit
Not heard of folk having issues with this.... but then not really been looking I guess.
cheers
scott
S1 50th Ann.
-
robin
- Jedi Master
- Posts: 10546
- Joined: Mon Mar 27, 2006 1:39 pm
Post
by robin » Sun Mar 02, 2008 9:31 pm
I would deffo remove the starter and take a look at the solenoid - no doubt with some patience you'll be able to dismantle, clean and reassemble it - hopefully will be running as new afterwards.
Cheers,
Robin
I is in your loomz nibblin ur wirez
#bemoretut
-
Scottd
- Posts: 964
- Joined: Thu Mar 10, 2005 1:26 am
- Location: Dundee
Post
by Scottd » Sun Mar 02, 2008 9:42 pm
ok cheers robin, I'll give it a go.... hopefully I'm not doing any damage in the mean time.
S1 50th Ann.
-
robin
- Jedi Master
- Posts: 10546
- Joined: Mon Mar 27, 2006 1:39 pm
Post
by robin » Mon Mar 03, 2008 2:25 pm
Scottd wrote:ok cheers robin, I'll give it a go.... hopefully I'm not doing any damage in the mean time.
Compared to everything else on the engine the starter ring and drive are pretty tough, so hopefully won't be doing much damage ...
Cheers,
Robin
I is in your loomz nibblin ur wirez
#bemoretut