The place to "speak geek"
-
Victor Meldrew
- Posts: 5726
- Joined: Wed Jun 29, 2005 1:01 pm
- Location: Unable to use location services. Please turn on your wifi....
Post
by Victor Meldrew » Tue Mar 11, 2008 10:03 pm
What size is the outlet hose on an S1 throttle body....
My homemade aluminuim trunking is 3" and the outlet flange looks around about 2.1/2"
To get it all to fit together I have a cobbled together adaptor made up from cut up hose. The problem is that this gives me a sharp edge in the airflow imediatly before the throttle body, which isnt good for air flow. New, being stuck out here on an oil rig, I cant measure it myself so I was hopeing someone could tell me how big it is so I can order a smooth transition piece now so it is waiting for me when I get home.
Thanks already
Well it moves... might as well make the most of it....
-
roadboy
- Posts: 1599
- Joined: Tue Jul 25, 2006 11:51 pm
- Location: Newcastle Upon Tyne
-
Contact:
Post
by roadboy » Tue Mar 11, 2008 11:29 pm
70mm John.
PM coming your way btw.
Dan@JPS
-
Victor Meldrew
- Posts: 5726
- Joined: Wed Jun 29, 2005 1:01 pm
- Location: Unable to use location services. Please turn on your wifi....
Post
by Victor Meldrew » Tue Mar 11, 2008 11:33 pm
roadboy wrote:70mm John.
PM coming your way btw.
Dan@JPS
Just orderd a 70mm to 76mm smooth edge adaptor piece to replace that kerfuffle on the throttle body... you know the bit I an on about
Well it moves... might as well make the most of it....
