Anyone ever fitted them or is there anyone around me where i can take it to be fitted?
hurricane xenon kit
hurricane xenon kit
Just purchased a set and dont have any idea how to fit them
Anyone ever fitted them or is there anyone around me where i can take it to be fitted?
Anyone ever fitted them or is there anyone around me where i can take it to be fitted?
Re: hurricane xenon kit
There is a fitting guide here
http://wiki.seloc.org/a/Fit_a_HID_kit
http://wiki.seloc.org/a/Fit_a_HID_kit
Alan
S2 111S
S2 111S
Re: hurricane xenon kit
thanks mate
dont know wether i should attempt this myself as i will probably spend more money getting the car put back in one piece than i would have to get them fitted in the 1st place

dont know wether i should attempt this myself as i will probably spend more money getting the car put back in one piece than i would have to get them fitted in the 1st place
- Alex 111s
- Posts: 489
- Joined: Thu Dec 20, 2007 1:45 pm
- Location: Malongo, Cabinda Province - Oyne - Buckie
Re: hurricane xenon kit
Cloggie,
I've had a set sitting in my garage waiting to be fitted for a month now. (haven't gotten around to doing them.) I'd be interested to hear your good/bad experiences of fitting them.

I've had a set sitting in my garage waiting to be fitted for a month now. (haven't gotten around to doing them.) I'd be interested to hear your good/bad experiences of fitting them.
Alex
Gone
111s In Magnetic Blue - Hofmann's Nitrons, Larini C.Sport, Huricane Induction, EBC Ultimax/Yellow Stuff, TD Pro-Race Wheels.
Range Rover Sport Autobiography
Gone
Range Rover Sport Autobiography
Re: hurricane xenon kit
Alex 111s wrote:Cloggie,
I've had a set sitting in my garage waiting to be fitted for a month now. (haven't gotten around to doing them.) I'd be interested to hear your good/bad experiences of fitting them.
Exige V6
Re: hurricane xenon kit
They are very straightforward to fit, really
I fitted a set to my s2exige then removed and refitted to an s2 elise and theywere the same- wheels off, liner out, screw in 4 self tappers, reassemble. The hardest (most fiddly) bit is getting the HID bulb into the bulb holder, as I did it with the reflector/light unit in situ.
I fitted a set to my s2exige then removed and refitted to an s2 elise and theywere the same- wheels off, liner out, screw in 4 self tappers, reassemble. The hardest (most fiddly) bit is getting the HID bulb into the bulb holder, as I did it with the reflector/light unit in situ.