Scottish Elises

Post by **pete** » Mon Apr 07, 2008 11:27 am

As my cooling saga continues can anyone tell me what temp the fan is supposed to come on at?

P

BiggestNizzy · Post by **BiggestNizzy** » Mon Apr 07, 2008 11:29 am

110 i think

pete if you need someone to suck through his teeth and poke stuff tonight gies a bell

RDH · Post by **RDH** » Mon Apr 07, 2008 11:33 am

pete wrote:As my cooling saga continues can anyone tell me what temp the fan is supposed to come on at?

P

I thought it was 102 ( well that's when mine starts)

steve_weegie · Post by **steve_weegie** » Mon Apr 07, 2008 11:49 am

Yup, around 100 is about right for an S2.

What are the symptoms pete??

BiggestNizzy · Post by **BiggestNizzy** » Mon Apr 07, 2008 12:16 pm

BiggestNizzy wrote:110 i think

RDH wrote:I thought it was 102 ( well that's when mine starts)

steve_weegie wrote:Yup, around 100 is about right for an S2.

oops

Post by **pete** » Mon Apr 07, 2008 12:23 pm

BiggestNizzy wrote:
BiggestNizzy wrote:110 i think

RDH wrote:I thought it was 102 ( well that's when mine starts)

steve_weegie wrote:Yup, around 100 is about right for an S2.
oops

mine got to 104 before I turned it off with no fan... What temp should I let it go to before panicking???

Grtame I may weell take you up on the sucking through teeth option, I'll give you a bell later.

Rich H · Post by **Rich H** » Mon Apr 07, 2008 12:29 pm

S1s and S2s are (IIRC) differnet, S1 has 2 senders, a brown one for the ecu (inc fan) and a blue one for the stack, so they are not necessarily both calibrated exactly the same. S2s only have one sender so should not have this problem.

Poke the fan make sure it still goes round, check the fuses (I assume it has its own) and I would allow it up to 110 or so as long as you have no history of HGF, liner issues or waterleaks

steve_weegie · Post by **steve_weegie** » Mon Apr 07, 2008 12:37 pm

pete wrote: mine got to 104 before I turned it off with no fan... What temp should I let it go to before panicking???

Probably about 103.5 by the sounds of things

If its not on by 104, you've probably got an issue THB.... Check the fuse first, and if thats fine, try bypassing the fan relay with a paperclip and see if it turns on.

kirk · Post by **kirk** » Mon Apr 07, 2008 1:22 pm

if its reached 110 degrees the chances are the cooling fan is siezed. take the front grill off and see if the fan moves. if it doesn't then its a clam off job to replace it.

Sanjøy · Post by **Sanjøy** » Mon Apr 07, 2008 1:24 pm

They do jam stuck and do not always blow the fuse. PITA to replace a clam off.

Scottish Elises

Fan

Fan

Re: Fan

Re: Fan

Re: Fan

Re: Fan

Re: Fan

Re: Fan

Re: Fan

Re: Fan

Re: Fan