brake pipe sizes and fittings

The place to "speak geek"
Post Reply
User avatar
thinfourth
Posts: 3177
Joined: Tue Mar 15, 2005 12:06 pm
Location: Playing in the mud near aberdeen

brake pipe sizes and fittings

Post by thinfourth » Thu Jul 03, 2008 4:20 pm

After getting annoyed at having to go to a garage to get brake pipes made up i have bit the bullet and ordered a decent flaring kit

Now before i get the pipes and fittings are the fittings on a elise metric and is the brake pipe 3/16"
Landrover 90 = Muddy shed spec
Fiat panda = Couldn't care less spec
Landrover ?? = Muddy shrek spec
Unimog 404S = Very slow silly offroader spec
Kubota F1900 = Snowplough spec
Top
ian.kane
Posts: 3
Joined: Fri Dec 28, 2007 4:37 pm
Location: aberdeen

Re: brake pipe sizes and fittings

Post by ian.kane » Mon Jul 07, 2008 1:47 pm

Am sure the pipe is 3/16" & the fitting is M10x1
Top
User avatar
Baggy
Posts: 490
Joined: Sun Aug 28, 2005 4:10 am
Location: The Deen

Re: brake pipe sizes and fittings

Post by Baggy » Thu Jul 10, 2008 11:51 am

I've got a flaring tool if you want to borrow it.
Baggy

Silver S1 111s

The Deen
Top
Post Reply

Return to “Technical”