Hi,
Not an everyday question...
Soon after I bought my Exige nearly 3 yrs ago, I went and bought a softtop conversion.. Since then the hardtop has been on and off many times and I (stupidly..) never bothered using the correct key to loosen and tighten the hardtop, hence the bolt heads are now badly worn..
I was wondering if replacement bolts are available for the hard top. The hardtop itself is perfectly fine. I asked my dealer (Hexham Horseless Carriages) a while ago and they didn't have an answer for me at the time..
Has anybody got any thoughts on this?
cheers,
Cowan
Exige hardtop bolts..
Re: Exige hardtop bolts..
Hi Cowan, Hendeg(Gary) on here is Grampian Fastners and can almost certainly replace anything for you.
You could either give him the size or send him a bolt. AliC or Craig will also probably be able to help out.
tut
You could either give him the size or send him a bolt. AliC or Craig will also probably be able to help out.
tut
-
alicrozier
- Posts: 4394
- Joined: Thu Sep 01, 2005 12:58 pm
- Location: Aberdeen
Re: Exige hardtop bolts..
These are what you're after - pretty specialised as the shank is reduced diameter.
http://www.bell-colvill.co.uk/LotusShop ... A116B1075F#
http://www.bell-colvill.co.uk/LotusShop ... A116B1075F#
All characters appearing in this post are fictitious. Any resemblance to real persons, living or dead, is purely coincidental.
Any references to laptimes, speed or driving on the public highway are purely for dramatic effect.
Any references to laptimes, speed or driving on the public highway are purely for dramatic effect.
Re: Exige hardtop bolts..
Thanks Guys!
Very much appreciated! I will follow this up.
cheers,
Cowan
Very much appreciated! I will follow this up.
cheers,
Cowan
Re: Exige hardtop bolts..
If they are out of stock, I have a set bolts( well a whole roof) you can have until the replacments come in.
Let me know.
Scotty
Let me know.
Scotty
"Here for a good time not a long time"