Connector doo dahs for K Series coversion
Connector doo dahs for K Series coversion
I am looking for a connector, the one missing out of the picture. Think it connects the VVC engine to the emerald via the conversion loom. It will save having to cut the whole loom. Does anyone have one kicking about ?
S1 Elise - Shed spec
330d - Dog carrying spec
640d - Grown up spec
Astravan Sportive SE - Supervan spec
330d - Dog carrying spec
640d - Grown up spec
Astravan Sportive SE - Supervan spec
Re: Connector doo dahs for K Series coversion
DDtB probably has one in his ever increasing pile of used K Series engines lying in the back of his garage. 
Re: Connector doo dahs for K Series coversion
Should be able to get one off any standard EU3 rover engined car.
Have a google or look on eBay as I'm sure I came across places selling them as flying looms...
Have a google or look on eBay as I'm sure I came across places selling them as flying looms...
S2 Elise (cobalt blue with stripes) - toy spec
Caterham 7 - hillclimb spec
Yamaha Thundercat - 2 wheeled toy spec
Caterham 7 - hillclimb spec
Yamaha Thundercat - 2 wheeled toy spec
Re: Connector doo dahs for K Series coversion
Even if you get the connector, you'll also need all the inserts and a crimping tool.
If you're keeping the Emerald it would actually be easier just to crimp the wires into the Emerald connector (available from Emerald, amongst others).
The missing connector is the vehicle loom connector - it connects stuff like the ignition, rev counter, temperature gauge, fuel pump, fan(s), etc.
Cheers,
Robin
If you're keeping the Emerald it would actually be easier just to crimp the wires into the Emerald connector (available from Emerald, amongst others).
The missing connector is the vehicle loom connector - it connects stuff like the ignition, rev counter, temperature gauge, fuel pump, fan(s), etc.
Cheers,
Robin
I is in your loomz nibblin ur wirez
#bemoretut
#bemoretut