V6 Dash removal

The place to "speak geek"
Post Reply
User avatar
Kinger
Posts: 1552
Joined: Wed Jan 27, 2010 10:12 pm
Location: Aberdeen

V6 Dash removal

Post by Kinger » Sun Jun 07, 2020 6:54 pm

I've got an irritating rattle / vibration from behind the dash at the bottom of the windscreen drivers side. It goes away if I push the top of the screen outwards and I don't have the noise if I have the hard top on.

I've looked at the De Roure drawings but can't see anything which shows how the dash or how its secured, any advice on dash removal appreciated.

Cheers

User avatar
C7Steve
Posts: 4456
Joined: Mon Mar 07, 2011 2:00 pm
Location: Aberdeen

Re: V6 Dash removal

Post by C7Steve » Mon Jun 08, 2020 10:05 am

Sorry mate, don’t have a clue how to dismantle the dashboard on the V6.


Steve.

User avatar
Mikie711
Posts: 4337
Joined: Mon Sep 10, 2007 11:21 pm
Location: Aberdeenshire.
Contact:

Re: V6 Dash removal

Post by Mikie711 » Mon Jun 08, 2020 10:45 am

Remove the passenger and driver side A post trim, PAB cover, steering wheel cowl and clock binnacle. That exposes the screws for the facia to remove the fascia top panel.
PM me your email, I have the service notes for the Exige V6 which I can email you.
Elise S2 260
GR Yaris
BMW M2 Comp
RRS HST
VW Caddy
Mk1 Escort (bare shell)

User avatar
neil
Posts: 3259
Joined: Fri Apr 06, 2007 1:55 pm
Location: Aberdeen

Re: V6 Dash removal

Post by neil » Mon Jun 08, 2020 2:04 pm

This sounds like a never ending job. Get rid of one rattle and introduce a few new ones
Exige V6

User avatar
DJ
Posts: 1412
Joined: Sun Jul 15, 2007 8:11 pm
Location: East Lothian

Re: V6 Dash removal

Post by DJ » Mon Jun 08, 2020 5:09 pm

Can't help with the V6, but when I got my wee Cooper S it had the most annoying rattle that I couldn't tell exactly where it was coming from. Spent a morning taking the dash to bits, removing the big speedo, rev counter, heater, radio/CD, vents etc. Hundreds of little screws.

Image

When I drove it with almost just the steering column left, the rattle was still there! :evil:. Couldn't trace it at all, so after some cursing put it all back together.

Then a few days later I stumbled across this 40 second clip on Youtube :roll: Problem solved! :damnfunny

Watch on YouTube


Guess message of this post is try and narrow down as much as possible before attacking with a screwdriver. :)
'03 Elise 111S - Sold :(
'55 Boxster S - Sold :(
'08 Exige S 240PP - Sold :(
'10 Evora NA - Sold :(
'12 Cayman R - Sold :(
'22 Alpine A110 :)

User avatar
C7Steve
Posts: 4456
Joined: Mon Mar 07, 2011 2:00 pm
Location: Aberdeen

Re: V6 Dash removal

Post by C7Steve » Sun Jul 19, 2020 7:38 am

Kinger wrote:
Sun Jun 07, 2020 6:54 pm
I've got an irritating rattle / vibration from behind the dash at the bottom of the windscreen drivers side. It goes away if I push the top of the screen outwards and I don't have the noise if I have the hard top on.

I've looked at the De Roure drawings but can't see anything which shows how the dash or how its secured, any advice on dash removal appreciated.

Cheers
Did you manage to get the dash panel removed and fix the problem?


Steve.

User avatar
Kinger
Posts: 1552
Joined: Wed Jan 27, 2010 10:12 pm
Location: Aberdeen

Re: V6 Dash removal

Post by Kinger » Sun Jul 19, 2020 8:38 pm

Steve, I didn’t even start the work 🤣

User avatar
mckeann
Posts: 5370
Joined: Thu Mar 10, 2005 9:20 am
Location: Bo'ness

Re: V6 Dash removal

Post by mckeann » Tue Jul 21, 2020 10:14 am

DJ wrote:
Mon Jun 08, 2020 5:09 pm
Can't help with the V6, but when I got my wee Cooper S it had the most annoying rattle that I couldn't tell exactly where it was coming from. Spent a morning taking the dash to bits, removing the big speedo, rev counter, heater, radio/CD, vents etc. Hundreds of little screws.

Image

When I drove it with almost just the steering column left, the rattle was still there! :evil:. Couldn't trace it at all, so after some cursing put it all back together.

Then a few days later I stumbled across this 40 second clip on Youtube :roll: Problem solved! :damnfunny

Watch on YouTube


Guess message of this post is try and narrow down as much as possible before attacking with a screwdriver. :)


How the fcuk do Mini let a car go out the factory with such an easy to fix and obvious fault

User avatar
robin
Jedi Master
Posts: 10531
Joined: Mon Mar 27, 2006 1:39 pm

Re: V6 Dash removal

Post by robin » Tue Jul 21, 2020 7:21 pm

It's built by the ex lotus guys, obvz.
I is in your loomz nibblin ur wirez
#bemoretut

Post Reply