Shared Bits

ninja · Post by **ninja** » Thu Mar 06, 2008 12:47 am

i've got

two rear potenza's (part worn 4mm tread)
two ignition coils
a water temperature guage sender
crank position sensor
camshaft position sensor
a main relay module
standard lotus exhaust
4 rear standard light clusters and bulb holders
spare catalitic converter

all for the S2 (k series engine)

let me know if you need anything

i did have an ECU but that's been "borrowed"

ninja

Hambo · Post by **Hambo** » Wed Jul 09, 2008 9:23 pm

I have a big bore flex pipe cut and shut tipe,its new and FOC to a good down pipe home.

Post by **Shug** » Thu Jul 10, 2008 9:25 am

I've deleted a couple of posts asking for things as this is supposed to be a repository for shared stuff - nobody will read a request in it. If you need something, post a new thread so it'll be seen.

craigs135s · Post by **craigs135s** » Sat Aug 09, 2008 8:49 pm

My cat is at Dom's if anyone needs it. Also there is a standerd S1 Exige exhaust at Alis if anyone needs that.

Cheers
C

Mr Momo · Post by **Mr Momo** » Sun Aug 10, 2008 5:49 pm

Standard Lotus 111R Exhaust

111R rear alloy

F2GH (must pick-up)

Victor Meldrew · Post by **Victor Meldrew** » Sun Aug 10, 2008 9:07 pm

S1 radiator that doesn't leak.... I don't think there are any blockages either...

ClarkyBoy · Post by **ClarkyBoy** » Tue Jun 30, 2009 8:47 pm

i have a full standard induction kit for a K-series S2 sitting in my shed gathering dust!

neil · Post by **neil** » Tue Jun 30, 2009 9:06 pm

I've got an OBD reader - http://www.obdkey.com/ bluetooth version complete with laptop and PDA to talk to it

Stu160 · Post by **Stu160** » Wed Jul 01, 2009 12:44 am

S1 Sport 160

Stu

woody · Post by **woody** » Wed Jul 01, 2009 1:43 am

Stu160 wrote:S1 Sport 160

Stu

I'll have a front wheel please Stu.

alicrozier · Post by **alicrozier** » Tue Jul 07, 2009 12:21 pm

3-ton chain hoist.

Was going to mount it in the garage but would need some steelwork. Actually total overkill for the garage but we like overkill.

Might be of use to some of the offroading fraternity? ThinPaul? ...could probably lift your Landy...

Rich H · Post by **Rich H** » Tue Jul 07, 2009 12:39 pm

I have the "modifying a K series videos" from years ago that Shoomer gave me, FTGH.
Got half way through and then we repalced the Vid with a DVD recorder

tut · Post by **tut** » Tue Jul 07, 2009 4:34 pm

I presume that they are the Lorne Mason ones, interesting viewing.

tut

Ferg · Post by **Ferg** » Sun Feb 21, 2010 8:36 pm

S1 Standard downpipe with flexi. Not brilliant condition, but no holes etc. Perfect if you need it to keep you going.

Rich H · Post by **Rich H** » Mon Feb 22, 2010 10:06 am

Not much use for the Elsie but I have an MOT gas tester (CO and HC only) and a CIS tester for testing the old Bosch mechanical fuel injection systems (K-Jetronic and the like)
Based in Preston, not far off M6 J30

Scottish Elises

Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits

Re: Shared Bits