The place to "speak geek"
-
Trap 125
- Posts: 83
- Joined: Fri Apr 27, 2007 8:23 pm
Post
by Trap 125 » Wed Sep 12, 2007 8:46 pm
My washers have gradually got weaker & weaker and are now spraying out a pathetic 5 inch piddle of water. There is plenty of water in the reservoir and the motor sounds enthusiastic. Any body got any ideas or suggestions why they have slowly become pathetic?
1996 Porsche 993 C2
S2 Exige, Magnetic Blue - Sold
-
jj
- Posts: 4887
- Joined: Wed Apr 20, 2005 12:30 pm
- Location: Glasgow
Post
by jj » Wed Sep 12, 2007 9:25 pm
My s2 exige did this; remove the pump from the washer bottle (pull it vertically, its only push fit) and then water bottle from the engine bay, my little rubber grommit in the bottle was all clogged up with mouldy gunk. Cleared it, blew it through with a hose, and it was fine.
-
Trap 125
- Posts: 83
- Joined: Fri Apr 27, 2007 8:23 pm
Post
by Trap 125 » Wed Sep 12, 2007 10:36 pm
Many thanks. Will give it a go tomorrow.
1996 Porsche 993 C2
S2 Exige, Magnetic Blue - Sold
-
Trap 125
- Posts: 83
- Joined: Fri Apr 27, 2007 8:23 pm
Post
by Trap 125 » Thu Sep 13, 2007 3:12 pm
Washers sorted! Many thanks for the advice. Was exactly what you said.
1996 Porsche 993 C2
S2 Exige, Magnetic Blue - Sold
