Page 1 of 1

starter motor problem

Posted: Sun Mar 02, 2008 3:24 pm
by Scottd
When I start the car its sounding like the starter motor's not disengaging quickly enough. So it makes that noise you get if you turn the ignition when the engine is already running.

Do I need a new starter motor or might it just need taken off and oiled a bit :)

Not heard of folk having issues with this.... but then not really been looking I guess.

cheers

scott

Re: starter motor problem

Posted: Sun Mar 02, 2008 9:31 pm
by robin
I would deffo remove the starter and take a look at the solenoid - no doubt with some patience you'll be able to dismantle, clean and reassemble it - hopefully will be running as new afterwards.

Cheers,
Robin

Re: starter motor problem

Posted: Sun Mar 02, 2008 9:42 pm
by Scottd
ok cheers robin, I'll give it a go.... hopefully I'm not doing any damage in the mean time.

Re: starter motor problem

Posted: Mon Mar 03, 2008 2:25 pm
by robin
Scottd wrote:ok cheers robin, I'll give it a go.... hopefully I'm not doing any damage in the mean time.
Compared to everything else on the engine the starter ring and drive are pretty tough, so hopefully won't be doing much damage ...

Cheers,
Robin