jamie wrote:I got so fed up of the crappy lights last weekend that I have purchased a set of HID lights for the dipped beam.
I am going to attempt to fit them this weekend, any peeps got any recommendations on making the job easier - eg like where to secure the ballasts?
Had a read through the instructions and had a look on the online guides all seems relatively straight forward. Hope I don't live to regret saying that...
Jamie,
You'll appreciate the difference.
the job is pretty straightforward.
Wheel off
wheelarch liner out of the way
Headlight lense cover off
dipped beam assey. out
change bulb
open up the gromet a bit & feed HID wires through & connect up.
put back dipped beam assey. in place.
mount balast on the side of the crash structure.
put everything back together.
Check fuse is correct rating & change if necessary. (15amp required for YvoTuk's kits & 10amp installed as std.)
& then off to your nearest MOT test station to get your headlight alignment set.
Alex
Gone 
111s In Magnetic Blue - Hofmann's Nitrons, Larini C.Sport, Huricane Induction, EBC Ultimax/Yellow Stuff, TD Pro-Race Wheels.
Range Rover Sport Autobiography
