The place to "speak geek"
-
Stevo9
- Posts: 112
- Joined: Sat Aug 29, 2009 7:20 pm
- Location: Melrose
Post
by Stevo9 » Sat Oct 31, 2009 5:34 pm
Afternoon all,
After a slight altercation with a pheasant, I'm left needing a new drivers side wing mirror. Fortunately not the whole thing, just the black plastic casing that holds the glass. It seems to have popped out from the unit pretty cleanly, braking just one of the clips. Does anybody know where I can get a replacement? Don’t really want to have to buy the whole unit. It is a '99 S1 Elise.
Thanks in advance.
Stephen.
Oh, and anybody know any good pheasant recipes?

-
BiggestNizzy
- Posts: 8932
- Joined: Sun May 27, 2007 6:47 pm
- Location: Kilmarnock
-
Contact:
Post
by BiggestNizzy » Sat Oct 31, 2009 5:36 pm
It's off a metro
Sent from my ZX SPECTRUM +2A
-
RDH
- Posts: 2840
- Joined: Mon Mar 13, 2006 9:10 pm
- Location: Glasgow
Post
by RDH » Sat Oct 31, 2009 6:10 pm
BiggestNizzy wrote:It's off a metro
Or an early rover 200
Caterham Roadsport 190
Tesla Model 3 LR RWD
Volvo XC60 - family and dug spec!
-
tut
- Barefoot Ninja
- Posts: 22975
- Joined: Tue Mar 15, 2005 5:53 pm
- Location: Tut End, Glen of Newmill
Post
by tut » Sat Oct 31, 2009 6:29 pm
I may have one Steve, will check tomorrow.
tut
-
tut
- Barefoot Ninja
- Posts: 22975
- Joined: Tue Mar 15, 2005 5:53 pm
- Location: Tut End, Glen of Newmill
Post
by tut » Sat Oct 31, 2009 6:39 pm
ps yep, you are talking to the expert. Pluck it, draw it, season with salt and pepper, smear with butter, streaky bacon over the breast, roast in a hot oven, 180C for 35 mins, take off bacon with 10 mins to go.
That's how this little bugger ended up.
tut
-
Stevo9
- Posts: 112
- Joined: Sat Aug 29, 2009 7:20 pm
- Location: Melrose
Post
by Stevo9 » Sat Oct 31, 2009 6:50 pm
That's what I'm talking about!
Thanks for your help guys. tut, let me know if you have one, we can work out some suitable recompense.

-
tut
- Barefoot Ninja
- Posts: 22975
- Joined: Tue Mar 15, 2005 5:53 pm
- Location: Tut End, Glen of Newmill
Post
by tut » Sat Oct 31, 2009 7:34 pm
Just checked Steve and I have four mirror bodies but only one with the plastic rim and mirror, which is cracked courtesy of Khan.
Sounds as if you still have the glass, so I can post the plastic rim down to you if that is all you need. No payment necessary.
tut
ps Brian Laing may recognise it.
-
Mr Momo
- Posts: 2848
- Joined: Fri Mar 11, 2005 12:39 am
- Location: ABZ
Post
by Mr Momo » Sat Oct 31, 2009 8:35 pm
So it's not Scotty's ?
Emira - Volvo spec
A1 Black Edition - Ilford HP5 spec
-
tut
- Barefoot Ninja
- Posts: 22975
- Joined: Tue Mar 15, 2005 5:53 pm
- Location: Tut End, Glen of Newmill
Post
by tut » Sat Oct 31, 2009 8:48 pm
Scotty's is on my car repainted yellow.
tut
-
Mr Momo
- Posts: 2848
- Joined: Fri Mar 11, 2005 12:39 am
- Location: ABZ
Post
by Mr Momo » Sat Oct 31, 2009 9:06 pm
Emira - Volvo spec
A1 Black Edition - Ilford HP5 spec
-
Stevo9
- Posts: 112
- Joined: Sat Aug 29, 2009 7:20 pm
- Location: Melrose
Post
by Stevo9 » Sat Oct 31, 2009 9:07 pm
Thanks tut, unfortunately I don’t have the mirror, it went with the trim into the hedge. I'm going to go back tomorrow to see if I can find it though. Maybe I can salvage the glass. Thanks for the offer and I'll let you know.
Thanks very much for the help.
Cheers
Stephen
-
tut
- Barefoot Ninja
- Posts: 22975
- Joined: Tue Mar 15, 2005 5:53 pm
- Location: Tut End, Glen of Newmill
Post
by tut » Sat Oct 31, 2009 9:13 pm
Let me re-check, but when I had a complete one fitted to N1 during its re-spray, I think that Alan got it from Dingbros for around £10.
tut
-
brian
- Posts: 180
- Joined: Fri Mar 25, 2005 9:04 am
Post
by brian » Mon Nov 02, 2009 1:50 pm
tut wrote:Just checked Steve and I have four mirror bodies but only one with the plastic rim and mirror, which is cracked courtesy of Khan.
Sounds as if you still have the glass, so I can post the plastic rim down to you if that is all you need. No payment necessary.
tut
ps Brian Laing may recognise it.
I though Khan had eaten mine!
Brian
-
tut
- Barefoot Ninja
- Posts: 22975
- Joined: Tue Mar 15, 2005 5:53 pm
- Location: Tut End, Glen of Newmill
Post
by tut » Mon Nov 02, 2009 6:03 pm
Only partly Brian, but he certainly chewed the glass.
tut
-
Stevo9
- Posts: 112
- Joined: Sat Aug 29, 2009 7:20 pm
- Location: Melrose
Post
by Stevo9 » Sat Nov 07, 2009 5:35 pm
The saga continues....
I went to the scrappy today. No Rover 100 but he did have the mirror from a Rover 200. It looked perfect, but when I compared it to the passenger side, the top line of the section that holds the glass was a lot wider than the elise mirror - about 3/4's of an inch compared to about a 1/4. I didnt get it as I thought it best to have one exactly the same. I can get a 100 mirror of the 'bay for about £20 or an Elise one from a breakers down south for £50. Will the 100 mirror be the same dimensions as the passenger side?
Sorry to be a pain the arse but your help is really appreciated!
Cheers
Stephen