Scottish Elises

Some time ago I fitted an SPA Oil & Press Gauge centrally between Driver & Passenger using the switched 12V and -Ve from the cigarett lighter socket.

The spare 52mm hole just had a blank.

I am now fitting a digital clock and need a Non-switched 12V in same position. I can use the lighting +12 v at the cigarett socket but need to run a non-switched supply.

The interior light is non switched, but not than easy to run a cable,

Any usfull suggestions. I can run back to battery with a fuse but anywhere easier ?

Thansk

Andy

Hi Andy,

The closest I can think of is the 12v constant feed for the Radio. Radio has Ignition and a constant battery feeds, it would easy to bridge into that and run the cable with the rest of the loom (under the alloy kick panel).

Alan

Thanks,

Stero out, has a large Yellow double spade that I can fit a bullet connecter onto and run a cable.

Andy