Rev limiter on at 6200rpm, no 2nd cam?

The place to "speak geek"
Post Reply
User avatar
LotusLee
Posts: 392
Joined: Fri Jan 20, 2006 7:22 pm
Location: Blairgowrie now Breakish

Rev limiter on at 6200rpm, no 2nd cam?

Post by LotusLee » Wed Oct 26, 2011 3:07 pm

Just had my car serviced today but on the way home as soon as I tried to go on 2nd cam it hit the rev limiter at 6200rpm, annoyingly I was just about home so looks like another 130 mile round trip back to MMC :evil: The car has never done this before, has anyone had similar? The only thing picked up in the service was the oxygen sensor on the exhaust was a tad slack and needed tightened, not sure if that could be anything to do with it. cheers
2012 VW Caddy 3.2 v6 'sleeper'
Image

woody
Posts: 5637
Joined: Mon Dec 26, 2005 4:03 pm
Location: Southside Triangle

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by woody » Wed Oct 26, 2011 3:10 pm

Check the oil level first.

User avatar
LotusLee
Posts: 392
Joined: Fri Jan 20, 2006 7:22 pm
Location: Blairgowrie now Breakish

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by LotusLee » Wed Oct 26, 2011 3:27 pm

Just checked.... Got oil... PHEW
2012 VW Caddy 3.2 v6 'sleeper'
Image

User avatar
Shug
Posts: 13835
Joined: Wed Mar 09, 2005 8:28 pm
Location: Deepest, Darkest Ayrshire

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by Shug » Wed Oct 26, 2011 3:28 pm

And get on the blower to Craig, he'll probably have a list of things to try first to save you a journey.
2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R

User avatar
neil
Posts: 3261
Joined: Fri Apr 06, 2007 1:55 pm
Location: Aberdeen

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by neil » Wed Oct 26, 2011 3:30 pm

Have you tried switching it off and switching it back on again? (Seriously)
Exige V6

User avatar
kenny
Posts: 7666
Joined: Thu Mar 10, 2005 9:10 pm
Location: Bearsden

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by kenny » Wed Oct 26, 2011 4:48 pm

neil wrote:Have you tried switching it off and switching it back on again? (Seriously)
This.

Mine occasionally does the same.

User avatar
mikeyb13
Posts: 987
Joined: Tue Nov 13, 2007 7:23 pm
Location: Livingston

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by mikeyb13 » Wed Oct 26, 2011 5:23 pm

My exige did this after I jump started it. It was the cam switch fuse??? in the engine bay. There are two small black plastic fuse boxes on the bulkhead. think its the one on the left. Im sure its in the owners manual.
"I've had enough sh1t"

User avatar
mwmackenzie
Posts: 4314
Joined: Thu Feb 22, 2007 10:22 pm
Location: Edinburgh

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by mwmackenzie » Wed Oct 26, 2011 9:28 pm

Yup as mike says fuse on the bulkhead in the engine compartment on the passenger side.
Mark MacKenzie

BMW Z4 3.0si, [R14 MMK] To be Ring ready soon

Merc family hack [R4 MMK] 85% MacKenzie'd Family Spec

User avatar
LotusLee
Posts: 392
Joined: Fri Jan 20, 2006 7:22 pm
Location: Blairgowrie now Breakish

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by LotusLee » Fri Oct 28, 2011 4:28 pm

Cheers for the replies. Craig phoned me back and said the car might have been given 4.5litres of oil rather than 4 and that would cause these symtoms. When I checked the oil though it was only a couple of mm above max and the car has been back to normal since with no sign of oil leak. Hopefully it has sorted itself out and won't be an intermittent thing .
p.s I take it if the cam switch fuse goes it is a constant no 2nd cam and not intermittent?
2012 VW Caddy 3.2 v6 'sleeper'
Image

User avatar
mikeyb13
Posts: 987
Joined: Tue Nov 13, 2007 7:23 pm
Location: Livingston

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by mikeyb13 » Fri Oct 28, 2011 7:42 pm

Not sure Lee. It did it once so I changed the fuse. It never did it again
"I've had enough sh1t"

User avatar
mwmackenzie
Posts: 4314
Joined: Thu Feb 22, 2007 10:22 pm
Location: Edinburgh

Re: Rev limiter on at 6200rpm, no 2nd cam?

Post by mwmackenzie » Fri Oct 28, 2011 9:06 pm

If the fuse is blown it won't go on second cam at all :thumbsup
Mark MacKenzie

BMW Z4 3.0si, [R14 MMK] To be Ring ready soon

Merc family hack [R4 MMK] 85% MacKenzie'd Family Spec

Post Reply