Powder coating in Aberdeen
Powder coating in Aberdeen
Anyone know a friendly powder coating company in Aberdeen who don't charge the earth? Looking to get my roll over and harness bar done to freshen them up. Have used PPS in Inverurie before but they're not the cheapest.
Cheers
James
Cheers
James
S1 Elise 111s
Re: Powder coating in Aberdeen
http://www.customisedcoatings.co.uk/contact-
Gave me a reasonable quote for blasting / coating a wishbone set.
Gave me a reasonable quote for blasting / coating a wishbone set.
VX220 SC
M135i
Parajet V3 Moster 185
M135i
Parajet V3 Moster 185
Re: Powder coating in Aberdeen
I also used Customised Coatings for some wheels. Did a good job and reasonably priced.
Exige GT
Re: Powder coating in Aberdeen
Over the years I've done quite a few suspension rebuilds of mine and other peoples, even did tuts. The last one I did was AU55 which Mike Scrib now owns but after doing them all but AU55 powder coated the issue I discovered with PC is it isn't very resistant to stone chipping it's just to hard and tends to flake which lets water in behind and then it comes off.
For AU55 the wishbones were blasted and primed and then sprayed with smootherite although others have used POR15 which is supposed to be very good.
Just food for thought as powder coating isn't the be all and end all for something that lives in such a harsh environment.
For AU55 the wishbones were blasted and primed and then sprayed with smootherite although others have used POR15 which is supposed to be very good.
Just food for thought as powder coating isn't the be all and end all for something that lives in such a harsh environment.
Elise S2 260
GR Yaris
BMW M2 Comp
RRS HST
VW Caddy
Mk1 Escort (bare shell)
GR Yaris
BMW M2 Comp
RRS HST
VW Caddy
Mk1 Escort (bare shell)
Re: Powder coating in Aberdeen
POR15 is worth a look if you are looking for rust proofing protection qualities.
Bit fussy in applying but very DIYable, also doesn’t need blasting prep.
Only specific versions are UV stable so tends to need a normal topcoat paint though.
Bit fussy in applying but very DIYable, also doesn’t need blasting prep.
Only specific versions are UV stable so tends to need a normal topcoat paint though.
Re: Powder coating in Aberdeen
If you have look on SELOC i am almost positive someone repaired their footwell with it. Search it over there and you should end up with a bunch of hits to let you see what you can do with it.
Elise S2 260
GR Yaris
BMW M2 Comp
RRS HST
VW Caddy
Mk1 Escort (bare shell)
GR Yaris
BMW M2 Comp
RRS HST
VW Caddy
Mk1 Escort (bare shell)