Honda Map

The place to "speak geek"
Post Reply
migas
Posts: 5
Joined: Wed Jun 05, 2019 7:29 pm

Honda Map

Post by migas » Mon Jun 17, 2019 7:52 pm

Hello,

I ordered the stark kit with a Kpro ECU. Now i am looking for a good starting point regarding the mapping, so i could tinker from there on my own. Does someone has a mapping from the Rolling Road for a Stark instalation, preferably with JDM DC5 cams?

any help is much appreciated.

best regards
michail

User avatar
Mikie711
Posts: 4337
Joined: Mon Sep 10, 2007 11:21 pm
Location: Aberdeenshire.
Contact:

Re: Honda Map

Post by Mikie711 » Mon Jun 17, 2019 8:37 pm

Gourlay83 on here was the resident honda expert but he is no longer active. Foz might've one as he is running a honda.
Elise S2 260
GR Yaris
BMW M2 Comp
RRS HST
VW Caddy
Mk1 Escort (bare shell)

User avatar
scott.a
Posts: 138
Joined: Mon Sep 05, 2016 1:50 pm

Re: Honda Map

Post by scott.a » Mon Jun 17, 2019 9:05 pm

Mikie711 wrote:
Mon Jun 17, 2019 8:37 pm
Gourlay83 on here was the resident honda expert but he is no longer active. Foz might've one as he is running a honda.
Foz’s honda is supercharged.

User avatar
Gourlay83
Posts: 1663
Joined: Fri Jan 02, 2009 4:59 pm
Location: Aberdeen

Re: Honda Map

Post by Gourlay83 » Tue Jul 23, 2019 1:38 pm

Hi Michail, I could send you a map but my advice would be to use one of the standard pre-loaded maps. The K-Pro has a few base maps, and believe one even has the DC5 CAMS. You can upload this, which allows you to start the car and start the mapping process.

Have you fitted a wideband lambda?. If you have, you can log the fueling against a target map and create a specific map for your car. The Hondata software is very simple and with some guidance you can get great results.

I create all my fuel maps on the road, then take it to a dyno for tweeking but have to be honest I have only saw marginal improvements to the power curve (on N/A applications that is).

Best of luck.
Alan

P.S - remember and disable the immobiliser & secondary O2 sensor on the Kpro :)
"Chicks dig scars and I measure mine in feet"

Ford Fiesta Zetec \m/ - Get's me erse to work spec.
Caterham R500 - The grenade powered one.

User avatar
Dominic
Posts: 14411
Joined: Sat Mar 19, 2005 10:14 am
Location: Milton Of Campsie
Contact:

Re: Honda Map

Post by Dominic » Tue Jul 23, 2019 3:48 pm

:welcome back Alan :o)
http://www.dsaccountancy.com

1999 Lotus Elise Sport 135'99

migas
Posts: 5
Joined: Wed Jun 05, 2019 7:29 pm

Re: Honda Map

Post by migas » Sun Aug 25, 2019 7:55 pm

Hello Alan,

Sorry for the very late response, i have been tweaking in the garage:)

The car is now more or less ready. As proposed, i will work with a wideband lambda sensor and hope it will work with the KPro despite it is an innovate item... i also think that fueling will be manageable. it is more the cam angle which makes me worry. but if the standard values are ok, i should get it to work pretty good... otherwise i will re post:)

good you are back, btw!

User avatar
Gourlay83
Posts: 1663
Joined: Fri Jan 02, 2009 4:59 pm
Location: Aberdeen

Re: Honda Map

Post by Gourlay83 » Wed Sep 11, 2019 12:33 pm

Feel free to share your progress, haven't seen one in a while and always makes an interesting read.
"Chicks dig scars and I measure mine in feet"

Ford Fiesta Zetec \m/ - Get's me erse to work spec.
Caterham R500 - The grenade powered one.

Post Reply