Headlamp bracket

[macca16]

When replacing a headlamp bracket

I’m assuming getting rid of all the old tiger seal and reapplying to the clam is the best approach?
Only advantage I see in not taking it all off is the pre-made guide for alignment of the bracket.


Thoughts?

[macca16]

Hacked off much of it but left enough to get a fit easily in the same position

[macca16]

[macca16]

Sorted

[macca16]

Spot the problem?!

[Stephen]

Do you have a pick up tool?

[macca16]

No, but easily sorted thankfully.

Nice to get another simple job under the belt. I’m sure they’ll be plenty more tricky ones.

[MLCELICES2!]

Tidy job. Did you just do it with the wheel arch liner out?


Sent from my iPhone using Tapatalk

[macca16]

Just bent it back and held in place with a stick against the brake disc. The fuse box screws have seen better days so I decided to leave that for another day.

[MLCELICES2!]

That’s good to know thanks! Mine are pretty bad so will need done at some point as well.


Sent from my iPhone using Tapatalk

[Stephen]

That’s good to know thanks! Mine are pretty bad so will need done at some point as well.


Sent from my iPhone using Tapatalk

Just replace them with some stainless ones.