Headlamp bracket
Headlamp bracket
When replacing a headlamp bracket
I’m assuming getting rid of all the old tiger seal and reapplying to the clam is the best approach?
Only advantage I see in not taking it all off is the pre-made guide for alignment of the bracket.
Thoughts?
I’m assuming getting rid of all the old tiger seal and reapplying to the clam is the best approach?
Only advantage I see in not taking it all off is the pre-made guide for alignment of the bracket.
Thoughts?
Re: Headlamp bracket
Hacked off much of it but left enough to get a fit easily in the same position
Re: Headlamp bracket
Do you have a pick up tool?
If you're not living on the edge you're wasting too much space!
Re: Headlamp bracket
No, but easily sorted thankfully.
Nice to get another simple job under the belt. I’m sure they’ll be plenty more tricky ones.
Nice to get another simple job under the belt. I’m sure they’ll be plenty more tricky ones.
-
- Posts: 59
- Joined: Tue Jun 28, 2022 1:59 pm
Re: Headlamp bracket
Tidy job. Did you just do it with the wheel arch liner out?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Headlamp bracket
Just bent it back and held in place with a stick against the brake disc. The fuse box screws have seen better days so I decided to leave that for another day.
-
- Posts: 59
- Joined: Tue Jun 28, 2022 1:59 pm
Re: Headlamp bracket
That’s good to know thanks! Mine are pretty bad so will need done at some point as well.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Headlamp bracket
Just replace them with some stainless ones.MLCELICES2! wrote: ↑Sun Sep 10, 2023 9:14 pmThat’s good to know thanks! Mine are pretty bad so will need done at some point as well.
Sent from my iPhone using Tapatalk
If you're not living on the edge you're wasting too much space!