Page 1 of 1
Locks
Posted: Thu Mar 08, 2007 4:44 pm
by delands
I know its been discussed, but what was the fix to prevent the barrel going into door and sticking?
Posted: Thu Mar 08, 2007 4:55 pm
by mrbennybennett
Unscrew the round reflector on the inside of the door and a good spray, inside of the door at the back of the lock, of WD 40 or similar - then give it a few pushes in and out and that should do the trick
Well it has done on mine anyway
Anthony
Posted: Thu Mar 08, 2007 5:55 pm
by The_Rossatron
The WD 40 guys do some sort of silicon spray which works wonders.
Posted: Thu Mar 08, 2007 6:33 pm
by Rich H
Lithium grease, aka white grease, waterproof, sticky and lasts ages. WD40 runs out or evaporates too quickly
Posted: Fri Mar 09, 2007 12:18 am
by delands
Noted... For a temp fix I have sprayed grease directly round the edge which has helped a bit. Wife is using car tomorrow and I dont want her complaining that it is a cr@p car coz cant open/ close door.