Rattley Window

craigs135s · Post by **craigs135s** » Tue Jul 03, 2007 7:57 pm

My drivers window rattles like mad when it is down. Anyone know how to fix this or it is an MMC job.

Cheers
C

woody · Post by **woody** » Tue Jul 03, 2007 8:19 pm

mine's just started this as well.

I fixed it with the stereo as per all other noises & rattles

seriously; doubt it's a job for mmc.

mac · Post by **mac** » Tue Jul 03, 2007 8:39 pm

wind it up a wee touch

Mac

dezzy · Post by **dezzy** » Tue Jul 03, 2007 9:29 pm

My passenger one does that. I just tell the passenger not to put it all the way down. Would look at it if I could be bothered . . . I'm going to go on a rattle finding mission one of these days. Got several to find!

Rich H · Post by **Rich H** » Tue Jul 03, 2007 10:23 pm

the silent channel rubber bit came unstuck on mine, I found it in the bottom of the door.

Edin430 · Post by **Edin430** » Tue Jul 03, 2007 11:05 pm

my drivers one does it too

BiggestNizzy · Post by **BiggestNizzy** » Tue Jul 03, 2007 11:07 pm

I though it was meant to rattle

but the rubber seal at the A pillar side of the door is hanging loose anyone know how it's supposed to be held in place ?

Brunty · Post by **Brunty** » Tue Jul 03, 2007 11:46 pm

BiggestNizzy wrote:I though it was meant to rattle

but the rubber seal at the A pillar side of the door is hanging loose anyone know how it's supposed to be held in place ?

Special factory lotus spit I reckon

delands · Post by **delands** » Wed Jul 04, 2007 12:28 am

I got the TADTS reply from MMC with my last Elise.. though it wasnt doing it when I got the car.
This one is doing it too... and was ok when new.
Car going in tomorrow for gearbox work, so will mention again. If anyone gets a fix let me know incase of TADTS reply.

woody · Post by **woody** » Wed Jul 04, 2007 12:48 am

BiggestNizzy wrote:I though it was meant to rattle

but the rubber seal at the A pillar side of the door is hanging loose anyone know how it's supposed to be held in place ?

Clips. I've re-stuck mine with super dooper aerospacey glue stuff i happened to find.

Worked a treat for sticking the pass side window in again as well, and stuff.

Rich H · Post by **Rich H** » Wed Jul 04, 2007 7:46 am

Tiger seal

If TADTS why does mine not?

delands · Post by **delands** » Wed Jul 04, 2007 7:48 am

Exactly... didn't do it when the cars were new.

Post by **simon** » Wed Jul 04, 2007 1:02 pm

RICHARDHUMBLE wrote:If TADTS why does mine not?

Yours is an S1, DEL's is an S2

Mine does it too, Mac's solution is the best and cheapest one I've found

Rich H · Post by **Rich H** » Wed Jul 04, 2007 1:39 pm

Silly me, I assume this is another S2 enhancement?

Post by **simon** » Wed Jul 04, 2007 2:10 pm

Of course. They drop out less than S1s but rattle instead