Page 1 of 1
PTP 170 Fitting
Posted: Sun Jul 22, 2007 11:24 am
by Wacky Racer
I'm looking at fitting a PTP 170 kit. What's the easiest way to install it?
Posted: Sun Jul 22, 2007 12:27 pm
by Shug
Pay someone?
It's a new (VHPD) head, so if you're happy swapping heads over it's fine. Can be done fine with the engine still in the car - access is tight but no real problem.
Posted: Sun Jul 22, 2007 12:37 pm
by Rich H
You do need 3 semi skilled mechanics, 2 loopy collies, 1 tolerant wife, 1 inquisitive toddler and about 15 hours though
Posted: Sun Jul 22, 2007 1:18 pm
by Shug
RICHARDHUMBLE wrote:You do need 3 semi skilled mechanics, 2 loopy collies, 1 tolerant wife, 1 inquisitive toddler and about 15 hours though
Semi is a bit generous isn't it
Posted: Sun Jul 22, 2007 2:04 pm
by Rich H
Unskilled and hungover then!
Posted: Sun Jul 22, 2007 2:43 pm
by robin
It can be done in a day if you are well prepared ...
Cheers
Robin
Posted: Sun Jul 22, 2007 4:22 pm
by Rich H
8 pints of lager the night before does not count as "prepared"
: