RST V8

Anything goes in here.....
User avatar
mckeann
Posts: 5372
Joined: Thu Mar 10, 2005 9:20 am
Location: Bo'ness

RST V8

Post by mckeann » Sat Feb 11, 2006 11:00 pm

Hi all.

I was lucky enough to have a test drive in Russell Savory's (motopower) yellow caterham with the RST V8 engine fitted and thought i'd post up to let you know how it went.

I flew down to drive the car at North Weald, and walshy picked me up at stansted. We arrived to a cold but dry, sunny day. Perfect for driving a car with no weather protection and especially one with 340bhp!!!!!!

Russell arrived shortly after. He had driven the car down, and explained how he still likes to use the car on the road.

Walshy took me out for a blast, to show me what the car and, more importantly, engine were capable of. And its certainly capable. He pulled away gently, looked across, smiled, then gunned the throttle. The car leapt across the concrete, and as the rev counter swept round to 10,250rpm, he banged the sequential gear lever back into 2nd, and it started all over again. then 3rd, then 4th. The acceleration didnt let up as he climbed through the gears, and was like that feeling of being in a powerful aeroplane taking off from a runway, where the thrust pushes you back into your chair until your doing 200mph and you take off. In fact, the feelings were so close, i could swear it felt like we were doing 200 mph and about to take off . By this time i was suitably scared by the constant surge well into triple figures, and also by the rapidly dissapearing airfield. After a few more laps, it was my shot.

My nervousness at driving such a powerful car showed as i pulled away and stalled. It was more to do with my nerves than the tractability of the engine, as i later found out, it pulls from tickover in any gear upto the limiter. My first shot in the car was spent finding the traction limitations of the caterham, as full power in 3rd gear at 90mph still had the tail end moving about, and i had to be gentle with the inputs to keep it on line. after 10 minutes i pulled back in, with the biggest grin i've ever had since passing my test.

Walshy took out another customer who is putting this engine into his racecar. He arrived back looking white as a sheet, after finding out just what to expect of its performance.

After breakfast, and a few tips from Mr Walsh ( which basically involved, dont be scared of it, enjoy yourself, and show it who's boss ) I went back out for a play, this time on my own. Being a bit more relaxed helped immensly. This time, when the rear end broke traction on the throttle, instead of backing off, i kept my foot in and nudged the car back on line. The feeling is of one continious powerslide, but its available in a straight line, in almost any gear. It turned into the most addictive, and satisfying game, where I had much more power than traction, and had to put it down as best i could. After years of driving a car where the corners were the most fun, all of a sudden, the straights seemed interesting again.

I had a look under the bonnet, and even to a technical numpty like myself, i could see the high standards the car and engine were built to. From my point of view, everything just worked, simply and well, as it had been designed. This is obviously important, as i want an engine i can trust to deliver mile after mile, rather than spend hours tinkering with it to get the most out of it.

When Russell left with the car, i was gutted. It was like an adreneline rush, that you crave time and time again. I cant thank Russle and walshy enough for letting my test the car. Its defiantely something i'd consider in the elise. I think it'll turn it into a proper supercar killer. Watch this space.

User avatar
simon
Site Admin
Posts: 4970
Joined: Wed Mar 09, 2005 10:36 pm
Location: Carnoustie
Contact:

Post by simon » Sat Feb 11, 2006 11:06 pm

I knew you were after one of them.
You'll still break it :P

gordon
Posts: 684
Joined: Sun Mar 20, 2005 11:39 am

Post by gordon » Sat Feb 11, 2006 11:17 pm

I'm exhausted reading that. This is the best bit....
He pulled away gently, looked across, smiled, then gunned the throttle. The car leapt across the concrete, and as the rev counter swept round to 10,250rpm, he banged the sequential gear lever back into 2nd, and it started all over again
Impressive dramatic writing :lol:

Anyway. How does this thing look in terms of reliability. Surely it cant be as reliably as a Honda for the HUGE amount of miles you'll do with it on track and on road. I thought the Elise idea got scrapped. Was Walshy not supposed to be racing one last year in america??? :?

Agreed it would make a very very VERY impressive car. And if Tut says the Honda can be too much on the road, that would just be fun/dangerous/scary. :shock:

User avatar
mckeann
Posts: 5372
Joined: Thu Mar 10, 2005 9:20 am
Location: Bo'ness

Post by mckeann » Sat Feb 11, 2006 11:33 pm

The dramatic writing was for seloc's benefit, i just crossposted it here. :D

reliability wise, the test mule caterham has done 20,000 miles with russell driving it on the road, and walshy thrashing it about the airfield and tracks. Its lasted well. The only thing it needs servicing wise is the valve clearances adjusted, ala motorbike style.

As for usability on the road, it has way more power than traction, but the challenge is in putting the power down. Its a real challenge to drive well.

As for me breaking it. the road spec engine goes to 10,250rpm, the race one to 12,500rpm, and its been tested upto 14,000rpm, so even i shouldnt be able to break it. :lol:

gordon
Posts: 684
Joined: Sun Mar 20, 2005 11:39 am

Post by gordon » Sat Feb 11, 2006 11:41 pm

That will be scary. Christ, i was out in the Elise tonight on the greasy roads and got wheelspin in 2nd off the throttle. And thats with 200bhp less :shock: :shock:

Sound like it could be reliable then. In general, warm up/cool down procedures and regular good quality oil changes are really all most engines (bike/car/v8 whatever) need to hold good power and give good reliability.
Last edited by gordon on Sun Feb 12, 2006 11:34 am, edited 1 time in total.

User avatar
mckeann
Posts: 5372
Joined: Thu Mar 10, 2005 9:20 am
Location: Bo'ness

Post by mckeann » Sat Feb 11, 2006 11:54 pm

this engine is built from scratch, the only bike parts are the cylinder heads, which are stripped and rebuilt to motopowers specification. so its a bespoke unit. Its the engine thats being used in the new mclaren developed trackcar, so i would guess for them to use it, they expect it to be reliable

gordon
Posts: 684
Joined: Sun Mar 20, 2005 11:39 am

Post by gordon » Sun Feb 12, 2006 12:07 am

Hmmmmmm. It just theres reliable, and theres reliable. I mean, everyone knows a V tech will make good power and will do over 100k no probs. I know boys who work for Honda and they never EVER get any bother with them. But just how reliable can it be when they dont have the big ££ for R&D that a proven name like Honda has. I'm sounding like a Honda fan here, i'm not, i just like an engine that doesn't break. :D I'm just thinking that maybe 40-50k might be consitered reliable for an engine like that. Even if it's not the engine, what about the ancilliaries, drivetrain etc. Are they all up to coping with that kind of abuse and power for miles and miles. And feck me, you'll give it more abuse than anyone can, even Walshy. :shock: :lol: :lol:

Not slating the idea mate. I'm all for it. Just know how gutted you'd be if it all started going wrong. :) But then again.......... you could have 20k miles of extremely enjoyable ultimate Elise under your belt by then.

Gareth
Posts: 4959
Joined: Thu Mar 10, 2005 12:19 pm
Location: The Moon

Post by Gareth » Sun Feb 12, 2006 10:47 am

pics???

gordon
Posts: 684
Joined: Sun Mar 20, 2005 11:39 am

Post by gordon » Sun Feb 12, 2006 11:50 am

In fact. Just forget everything i said. Just had a look at the vids on the website

http://www.rst-v8.com/

Who cares how many miles it does. That is un fecking believeable.
:shock: 8)

Gareth
Posts: 4959
Joined: Thu Mar 10, 2005 12:19 pm
Location: The Moon

Post by Gareth » Sun Feb 12, 2006 12:22 pm

Yup, it's awesome.
The noise is unbelieveable...forget Honda....this is sooo much better.
How much to whack this in the Elise??

User avatar
mckeann
Posts: 5372
Joined: Thu Mar 10, 2005 9:20 am
Location: Bo'ness

Post by mckeann » Sun Feb 12, 2006 1:11 pm

i'll let you know this week


But its a detuned race engine, so its not to be compared with honda conversions, both price and performance wise

User avatar
mckeann
Posts: 5372
Joined: Thu Mar 10, 2005 9:20 am
Location: Bo'ness

Post by mckeann » Mon Feb 13, 2006 12:59 pm

the retail price is in the region of 18K. plus gearbox

Road spec doesnt need rebuilt at any intervals ( so i believe ) but the race engine is 30 hours.

User avatar
mckeann
Posts: 5372
Joined: Thu Mar 10, 2005 9:20 am
Location: Bo'ness

Post by mckeann » Mon Feb 13, 2006 2:06 pm

yep, and the RST is a hell of a lot lighter than the similar powertec unit. By about 35 Kg i believe. Not sure what weight the hyabusa engines are.

User avatar
mckeann
Posts: 5372
Joined: Thu Mar 10, 2005 9:20 am
Location: Bo'ness

Post by mckeann » Tue Feb 14, 2006 1:59 pm

OK, so mr insurance has stuck his beak in and said its a no no for me for the V8. Too young. So honda it is then. At least i should be back on trackdays sooner this way, even if it is only with 210bhp ish.

To be honest, at least i will still have people to race with on trackdays, as it would have been too easy with 350bhp.


neil

User avatar
Shug
Posts: 13835
Joined: Wed Mar 09, 2005 8:28 pm
Location: Deepest, Darkest Ayrshire

Post by Shug » Tue Feb 14, 2006 2:02 pm

Cut n paste is a wonderful function, eh? :lol:

As I said on SELC*CK, nae luck. Will be good to have you back out on track anyway.
2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R

Post Reply