Getting onto the ferry with my Exige

jossm · Post by **jossm** » Mon Jun 16, 2014 8:39 pm

I'm going to Spa and the Nurburgring next month in my exige, just wondering what the clearance is like for getting onto the ferry. Will i need to take my splitter off? i'm going with DFDS seaways Newcastle to Amsterdam.

Thanks

alicrozier · Post by **alicrozier** » Mon Jun 16, 2014 8:51 pm

Absolutely no problem. Many times with much lower. Watch out for the tie down widgets on the boat, don't straddle them.

neil · Post by **neil** » Mon Jun 16, 2014 9:30 pm

If there's a big gradient change just attack it at an angle, otherwise you'll be fine

jossm · Post by **jossm** » Mon Jun 16, 2014 10:29 pm

thanks for your help guys I just didn't want to get there and cant get on haha

alicrozier · Post by **alicrozier** » Tue Jun 17, 2014 6:35 am

They are very good at spotting low cars and put you on the bottom deck which also helps.

douglasgdmw · Post by **douglasgdmw** » Tue Jun 17, 2014 9:58 am

Was on DFDS with the Evora and the guys were happy for me to wait at the back and load the car at the end so I could get a space to open the doors fully. Meant I was with the lorries but happy to have the extra space.

The Dutch at the other end were not so accommodating and the Evora was hemmed in like a sardine (thankfully all the other passengers were nice enough to ensure no dings).

George

Scottish Elises

Getting onto the ferry with my Exige

Getting onto the ferry with my Exige

Re: Getting onto the ferry with my Exige

Re: Getting onto the ferry with my Exige

Re: Getting onto the ferry with my Exige

Re: Getting onto the ferry with my Exige

Re: Getting onto the ferry with my Exige