Plumbing/Fixings Help FALC

Anything goes in here.....
Post Reply
User avatar
shooomer
Posts: 653
Joined: Tue Jul 13, 2010 5:57 pm
Location: Edinburgh

Plumbing/Fixings Help FALC

Post by shooomer » Tue Oct 06, 2015 2:51 pm

Plastic drip tray below connects to drain via hose with male fixing at the yellow circle. Plastic has fatigued and threaded plastic cylinder at yellow circle has broken off. Any ideas how I can create a watertight drain hose from just a hole in the drip tray? Ideally I want a neat fixing like a plug hole rather rather silicone/gaff tape effort (hole is around 20mm dia) TIA, Paul
Image
Top
User avatar
r10crw
Posts: 1966
Joined: Thu Aug 10, 2006 8:14 pm
Location: Aberdeenshire

Re: Plumbing/Fixings Help FALC

Post by r10crw » Tue Oct 06, 2015 3:08 pm

Just use a standard drain plug waste which will leave you with a standard 1'1/4 threaded fitting on the underside. It means opening the hole up to 32mm but thats no big deal??

http://www.screwfix.com/p/sprung-basin- ... tted/73414
Hairdresser at heart.
Top
User avatar
r10crw
Posts: 1966
Joined: Thu Aug 10, 2006 8:14 pm
Location: Aberdeenshire

Re: Plumbing/Fixings Help FALC

Post by r10crw » Tue Oct 06, 2015 3:09 pm

PS Ive got a standard one I didnt use from my bathroom last week, you can have it for nothing. If u want it send me your addy
Hairdresser at heart.
Top
User avatar
shooomer
Posts: 653
Joined: Tue Jul 13, 2010 5:57 pm
Location: Edinburgh

Re: Plumbing/Fixings Help FALC

Post by shooomer » Tue Oct 06, 2015 4:30 pm

:thumbsup Found a PE black tank connector after a bit of googling
Mods, this can be deleted
Top
User avatar
BigD
Posts: 3209
Joined: Wed Aug 31, 2005 10:02 pm
Location: Falkirk

Re: Plumbing/Fixings Help FALC

Post by BigD » Tue Oct 06, 2015 6:49 pm

Was just about to say tank connector as that's what they use to connect to water tanks etc. But you're sorted now. 8)
Top
Post Reply

Return to “General Chat”