Both my Pax and Driver windows are now rattling like hell when going over even the smallest bump or hump. MMC have already fixed the driver window first, but I can't be arsed taking the car in every month or so to tighten a screw or two...
Anyway care to explain how I would tighting whatever needs tightened to stop this annoying rattle?
Cheers,
G.
Window Rattle.
-
- Posts: 26
- Joined: Thu Sep 07, 2006 1:10 pm
I believe the S2 had a different design of window winding mech from an S1 (definately does if its got electric windows), but it may be the same supporting guides.
Getting to the point now .....if so then there are a multiple number of screws and bolts for adjusting the feckin windows guides all of which can
a) be loose or b) become loose
Also the felt in the guides wears something cronic letting the window move
Felt is cheap part to buy but a bugger to fit
So basically your stuffed.....
Turn up the stereo like everyone else and stop wasting my time
Getting to the point now .....if so then there are a multiple number of screws and bolts for adjusting the feckin windows guides all of which can
a) be loose or b) become loose
Also the felt in the guides wears something cronic letting the window move
Felt is cheap part to buy but a bugger to fit
So basically your stuffed.....
Turn up the stereo like everyone else and stop wasting my time

Me toogorrie wrote: Could have got the upgraded pins... but I went for the skin flint insulation tape on the pins solution... it's quiet now.

It just needs replenished now and again.
Green Subaru Impreza Turbo, a 'classic'.
Silver Jeep Cherokee 2.5 TD, on SORN spec...
Black Disco 3, black van man spec...
Silver Jeep Cherokee 2.5 TD, on SORN spec...
Black Disco 3, black van man spec...
I did the insulation tape thing and it worked well to reduce door rattle
For the window (pax side rattle only) i removed the panel and cheched all the screws which were fine so i engineered a couple of bits of black rubber and slotted them in between the window and the door itself. This worked but my pax is forbidden to wind the window down
I've noticed that the rattles do come and go. It just depends what mood she's in that day
HTH
Ron

For the window (pax side rattle only) i removed the panel and cheched all the screws which were fine so i engineered a couple of bits of black rubber and slotted them in between the window and the door itself. This worked but my pax is forbidden to wind the window down

I've noticed that the rattles do come and go. It just depends what mood she's in that day

HTH
Ron
Utrinque Paratus