
S1 Honda Converison
Re: S1 Honda Converison
That looks absolutly awesome Alan great work M8 Thanks for the write up and the pics Jen 

The faintest ink is more Powerful than the strongest memory.
Life is not measured by the number of breaths we take, but by what takes our breath away
Life is not measured by the number of breaths we take, but by what takes our breath away
Re: S1 Honda Converison
Looking good. Even though I said I would never do it again after doing mine, it makes me want a project
Although I think having to do it in a nicely lit garage would help, I had this


Although I think having to do it in a nicely lit garage would help, I had this

Re: S1 Honda Converison
Looking great Alan.
The last two pictures are puzzling though. Assuming same camera and lighting, they are completely different colours.
tut
The last two pictures are puzzling though. Assuming same camera and lighting, they are completely different colours.
tut
Re: S1 Honda Converison

Thanks everyone!! Chuffed!!

Re: S1 Honda Converison
A tremendous story so far, and obviously still not yet concluded, one to rival the "Making of the Elise" story itself I'm sure.
Thanks for taking the time to share the pics.
It almost seems a shame to take the car out on the road and risk the stone-chips etc
but I'm sure you'll both get over that quickly and enjoy the end result immensely.
It is quite inspiring to see an Elise "taken back to the bone" and reconstructed in this way. I've often wondered what I would need to do to properly restore my trusty 10-yr-old example if I keep it another few years, and I think I now have the answer (although I reckon I'd stick with my existin New Ali colouring...burnt orange has now been done before!!)
all the best for the closing stages
Campbell
Thanks for taking the time to share the pics.
It almost seems a shame to take the car out on the road and risk the stone-chips etc

It is quite inspiring to see an Elise "taken back to the bone" and reconstructed in this way. I've often wondered what I would need to do to properly restore my trusty 10-yr-old example if I keep it another few years, and I think I now have the answer (although I reckon I'd stick with my existin New Ali colouring...burnt orange has now been done before!!)
all the best for the closing stages
Campbell
http://www.rathmhor.com | Coaching, training, consultancy
Re: S1 Honda Converison
Thank you for the kind words,
I finally got to drive the car last night. Me and Ali got the last of the panels on which took some time to get the fit and finish right but well worth the effort. Drove the car to Ali's garage as mine is full of MG crap. First off, its bloody quick. Couldn't really push it that hard as my Geo is waaay off but loving the honda and its short box.
Todays jobs will be checking everthing is tight and then a geo with a few loose ends to tie up. I will post some pics when i get in tonight.
Cheers
Alan
P.S Sorry I couldn't make the road run Mike, got to get this thing finished.
I finally got to drive the car last night. Me and Ali got the last of the panels on which took some time to get the fit and finish right but well worth the effort. Drove the car to Ali's garage as mine is full of MG crap. First off, its bloody quick. Couldn't really push it that hard as my Geo is waaay off but loving the honda and its short box.
Todays jobs will be checking everthing is tight and then a geo with a few loose ends to tie up. I will post some pics when i get in tonight.
Cheers
Alan
P.S Sorry I couldn't make the road run Mike, got to get this thing finished.
"Chicks dig scars and I measure mine in feet"
Ford Fiesta Zetec \m/ - Get's me erse to work spec.
Caterham R500 - The grenade powered one.
Ford Fiesta Zetec \m/ - Get's me erse to work spec.
Caterham R500 - The grenade powered one.
Re: S1 Honda Converison
Looks amazing, you S1 guys are starting to turn my head 

"I've had enough sh1t"
- Victor Meldrew
- Posts: 5724
- Joined: Wed Jun 29, 2005 1:01 pm
- Location: Unable to use location services. Please turn on your wifi....
Re: S1 Honda Converison
Nuf saidmikeyb13 wrote:Looks amazing, you S1 guys are starting to turn my head

Well it moves... might as well make the most of it....
Re: S1 Honda Converison
Alan, if you are finished by today, why not take a run up to Old Deer tomorrow and give us a looksy?
tut
tut
Re: S1 Honda Converison
Started Geo yesterday but we didn't like the front ride height so removed the Front brackets and re drilled them. Much happier with the stance of the car now, should be 115/110 which I think will be fine.
Trying to get the car ready for a Monday MOT but there is still a number of things to finish off.
Here is some pics of the cars first trip outside of the paintshop. If you are thinking of getting your car re sprayed I would highly recommend them, the 2 guys (Neil & Kenny) there are so fussy and take real pride in there work.



Cheers
Aln
Trying to get the car ready for a Monday MOT but there is still a number of things to finish off.
Here is some pics of the cars first trip outside of the paintshop. If you are thinking of getting your car re sprayed I would highly recommend them, the 2 guys (Neil & Kenny) there are so fussy and take real pride in there work.



Cheers
Aln
"Chicks dig scars and I measure mine in feet"
Ford Fiesta Zetec \m/ - Get's me erse to work spec.
Caterham R500 - The grenade powered one.
Ford Fiesta Zetec \m/ - Get's me erse to work spec.
Caterham R500 - The grenade powered one.
Re: S1 Honda Converison
That looks superb
Need to get some Defendall or Armourfend on it for the NE roads.
Brian

Need to get some Defendall or Armourfend on it for the NE roads.
Brian
Re: S1 Honda Converison
Loving your work mate 

alicrozier wrote:As Robin said, need to be comfortable and confident to push right up to the limit - sometimes you only find the limit by going beyond it...
(that's why I think Mike will do fine, that and his lack of imagination).![]()
Re: S1 Honda Converison
Absolutely awesome mate 
