Meta Alarm - linking with (shock horror) central locking

Post by **Shug** » Thu Oct 06, 2005 1:24 pm

Or a flexible ratchet extension with suitable allen bit on the end...

Either/or.

ninja · Post by **ninja** » Fri Oct 07, 2005 8:43 am

i'm kinda hoping that it will be remotely possible to get to the alarm WITHOUT taking the pax seat out! i'll also have a look into wiring up a little button that can lock the doors from the inside

ninja

The_Rossatron · Post by **The_Rossatron** » Fri Oct 07, 2005 9:12 am

ninja wrote:i'm kinda hoping that it will be remotely possible to get to the alarm WITHOUT taking the pax seat out! i'll also have a look into wiring up a little button that can lock the doors from the inside

ninja

The anti-car jacking benefit of this will also save lives! It works on so many levels. Anyone have a 111s that could take a pic of where this button is mounted?

would be much appreciated. the 111r has a different centre column.

edit: Just had a heads up from a pistonheads member who has done exactly this - "No, the alarm is not there, look behind your head unit..." apparently only the microwave sensor and other things are behind the bulkhead.

ninja · Post by **ninja** » Fri Oct 07, 2005 4:15 pm

bhind the head unit? bloody hell i'll never get to it in there - it was hard enough to put the head unit in and i cut my hand into ribbons while doing it off the aluminium facade.

can i not just get another reciever and program it to respond to the alarm key fob?

ninja

ninja · Post by **ninja** » Fri Oct 07, 2005 4:23 pm

extra 40 notes for the reciever etc which will learn the signal off the original lotus key.

from maplin again !

ninja

jj · Post by jj » Fri Oct 07, 2005 7:06 pm

In my s1 the alarm and stuff is all behind the dash, I saw it when I took it apart to cover it.

Post by **simon** » Fri Oct 07, 2005 7:27 pm

This all sounds like a hell of a lot of work when you should really be out driving it!

ninja · Post by **ninja** » Fri Oct 07, 2005 9:10 pm

simon i'm starting to agree with you mate!

but i've bought the stuff now so at some point in the next year or so i'll try and fit it!

ninja

The_Rossatron · Post by **The_Rossatron** » Fri Oct 07, 2005 10:32 pm

Don't worry it will be driven just plenty! If a jobs worth doing its worth doing right.

Or usually in my case worth half doing semi-right.

Post by **simon** » Fri Oct 07, 2005 11:13 pm

ninja wrote:but i've bought the stuff now so at some point in the next year or so i'll try and fit it!

sounds as though it's destined to be left in the garage/cupboard

ninja · Post by **ninja** » Mon Oct 10, 2005 1:53 pm

simon wrote:
ninja wrote:but i've bought the stuff now so at some point in the next year or so i'll try and fit it!
sounds as though it's destined to be left in the garage/cupboard

it's still on the kitchen table. by the end fo the week it'll be UNDER the kitchen table and by the following week it'll have vanished from all record!

such is the fate of my smart ideas

ninja