S1 / Rover PCD and boss

The place to "speak geek"
Post Reply
2F45T4U
Posts: 312
Joined: Wed Nov 21, 2007 10:35 am
Location: Aberdeenshire

S1 / Rover PCD and boss

Post by 2F45T4U » Sun Aug 03, 2014 10:23 am

hi chaps.

im looking for a Rover/Lotus front drive hub to use as a mandrel for skimming some old S1 discs on the lathe.

Im confused as to exactly what hub to use, they seem to range from 95.25 x 56.1 to 100 x 54.1 and i cant get a definite answer.

What hub do i need and what is the correct S1 Elise PCD x Bore?


cheers,
Top
User avatar
BiggestNizzy
Posts: 8932
Joined: Sun May 27, 2007 6:47 pm
Location: Kilmarnock
Contact:
Contact BiggestNizzy

Re: S1 / Rover PCD and boss

Post by BiggestNizzy » Sun Aug 03, 2014 6:45 pm

You might be able to pull one off an old metro
Sent from my ZX SPECTRUM +2A
Top
User avatar
tut
Barefoot Ninja
Posts: 22975
Joined: Tue Mar 15, 2005 5:53 pm
Location: Tut End, Glen of Newmill

Re: S1 / Rover PCD and boss

Post by tut » Sun Aug 03, 2014 7:08 pm

I have a spare one if you would like to try it.

tut
Top
2F45T4U
Posts: 312
Joined: Wed Nov 21, 2007 10:35 am
Location: Aberdeenshire

Re: S1 / Rover PCD and boss

Post by 2F45T4U » Tue Aug 05, 2014 7:29 pm

Thanks. I measured it last night and managed to find the right hub after a rummage through the scrappy. Then bought one online for a chunk cheaper as i didnt need the complete assembly. Tidy!

Hopefully not have to borrow yours now Tut but offer is appreciated
Top
Post Reply

Return to “Technical”