Spare Steering wheel....

Victor Meldrew · Post by **Victor Meldrew** » Sun Feb 04, 2007 3:36 am

Does anyone have a spare steering wheel lying about for an S1...

I have the Motorsport wheel which needs re-covered. I was going to send it in to http://www.bell-colvill.co.uk/LotusShop ... d=RETRIM_5 to get it done..

Anyone used them before?

Post by **simon** » Sun Feb 04, 2007 8:58 pm

Bit pointless sending it to B&C, just take it to MMC instead. All they do is send it off to the Lotus trim shop, which is meant to be very good.

Victor Meldrew · Post by **Victor Meldrew** » Sun Feb 04, 2007 9:53 pm

simon wrote:Bit pointless sending it to B&C, just take it to MMC instead. All they do is send it off to the Lotus trim shop, which is meant to be very good.

glad you mentioned that.... I didnt realise they did that, although it still smarts a bit giving MMC any of my money..

Titanium S1 111S (gla) · Post by **Titanium S1 111S (gla)** » Sun Feb 04, 2007 10:00 pm

While we are on topic, has anybody had their sill protector thingies re trimmed? My driver side one is a real mess and will need sorted one day soon. Does the Lotus trim shop do them??

jj · Post by jj » Sun Feb 04, 2007 10:05 pm

Yeah they will do anything.

Good luck getting the sill protectors off though, we tried wire, pulling and nothing would shift them!

Post by **simon** » Sun Feb 04, 2007 10:27 pm

You think giving money to B&C is any better!?!

Victor Meldrew · Post by **Victor Meldrew** » Sun Feb 04, 2007 11:31 pm

NOOPS 160 wrote:Probably not , but I don't like being shafted in front of my own eyes the same as the next man.

couldnt have put it better myself

tut · Post by **tut** » Mon Feb 05, 2007 1:00 am

John, I have a spare wheel, but you should be able to get one closer to you.

tut

Victor Meldrew · Post by **Victor Meldrew** » Mon Feb 05, 2007 1:06 am

tut wrote:John, I have a spare wheel, but you should be able to get one closer to you.

tut

Like, I'm going to miss an excuse for a road run... might give you a shout later this week...

Stephen · Post by **Stephen** » Mon Feb 05, 2007 10:59 am

John,
if you still need one i have a spare too.

Titanium S1 111S (gla) · Post by **Titanium S1 111S (gla)** » Mon Feb 05, 2007 12:00 pm

Yeah they will do anything.

Good luck getting the sill protectors off though, we tried wire, pulling and nothing would shift them!

Thanks JJ, I take it that they are glued on? When you say nothing would shift them does that mean that you didn't get them off and eventually gave up?

Stephen · Post by **Stephen** » Mon Feb 05, 2007 12:18 pm

DDTB got his off no problem.

Titanium S1 111S (gla) · Post by **Titanium S1 111S (gla)** » Mon Feb 05, 2007 12:27 pm

Thanks guys Iâ€™ll put that on the long list of â€œmust get around tosâ€

mac · Post by **mac** » Mon Feb 05, 2007 12:33 pm

Stephen wrote:DDTB got his off no problem.

Yeah - but the three of us really struggled to pull JJ's off

Just wasn't enough to grip

Mac

Victor Meldrew · Post by **Victor Meldrew** » Mon Feb 05, 2007 1:16 pm

mac wrote:
Stephen wrote:DDTB got his off no problem.
Yeah - but the three of us really struggled to pull JJ's off

Just wasn't enough to grip

Mac

perverts....