Strictly for tarmac whores
-
jj
- Posts: 4887
- Joined: Wed Apr 20, 2005 12:30 pm
- Location: Glasgow
Post
by jj » Tue May 22, 2007 2:58 pm
kenny wrote:Waiting on Ronnie calling back, R888's may be hard to get hold of apparently

NSF is on the wear bar, OSF has a couple of mil plus a spare in the garage with about a mil on it, hopefully those 3 will last a trackday and see me through next weeks MOT

I was going to go for R888s but the fronts are out of supply (i.e. nobody has them) for 6 weeks and the rears are 10-14 days.
-
kenny
- Posts: 7666
- Joined: Thu Mar 10, 2005 9:10 pm
- Location: Bearsden
Post
by kenny » Tue May 22, 2007 3:00 pm
Clucking bell

-
ed
- Posts: 9677
- Joined: Sun May 15, 2005 12:33 pm
Post
by ed » Tue May 22, 2007 3:04 pm
Mate ive got a couple of front 48s which are still legal if you are desperate!

You want me to bring one to KH?!
Octopus Energy Referral Code (£50 each!) share.octopus.energy/light-lynx-588
-
kenny
- Posts: 7666
- Joined: Thu Mar 10, 2005 9:10 pm
- Location: Bearsden
Post
by kenny » Tue May 22, 2007 3:07 pm
Probably only need one that will survive an MOT in a weeks time.
-
ed
- Posts: 9677
- Joined: Sun May 15, 2005 12:33 pm
Post
by ed » Tue May 22, 2007 3:08 pm
The wear marker is 2mm and i dont think either of them are on it yet.
Let me know!

Octopus Energy Referral Code (£50 each!) share.octopus.energy/light-lynx-588
-
kenny
- Posts: 7666
- Joined: Thu Mar 10, 2005 9:10 pm
- Location: Bearsden
Post
by kenny » Tue May 22, 2007 4:50 pm
Will do

-
tut
- Barefoot Ninja
- Posts: 22975
- Joined: Tue Mar 15, 2005 5:53 pm
- Location: Tut End, Glen of Newmill
Post
by tut » Tue May 22, 2007 5:07 pm
Kenny
My rear 888's are knackered so just fitting 48R's all round. My fronts are still good, but of course are 15" and you need 16".
tut
-
kenny
- Posts: 7666
- Joined: Thu Mar 10, 2005 9:10 pm
- Location: Bearsden
Post
by kenny » Tue May 22, 2007 8:12 pm
Hopefully I'll be ok with the spare I have Tut.
Roll call. So who is all on track then?
1) Kenwood
2)
-
jamie
- Posts: 1918
- Joined: Sun Oct 02, 2005 9:53 pm
- Location: Burgh
Post
by jamie » Tue May 22, 2007 8:37 pm
1) Kenwood
2)Jamie & Tango R
-
Clarkie
- Posts: 1094
- Joined: Fri Jun 16, 2006 10:28 pm
- Location: Falkirk
Post
by Clarkie » Tue May 22, 2007 11:07 pm
1) Kenwood
2)Jamie & Tango R
3) Clarkie
-
thinfourth
- Posts: 3177
- Joined: Tue Mar 15, 2005 12:06 pm
- Location: Playing in the mud near aberdeen
Post
by thinfourth » Wed May 23, 2007 6:40 am
kenny wrote:Probably only need one that will survive an MOT in a weeks time.
gareth has a set of rubber for an exige in his shed
I may be coming down to grab some passenger laps
there maybe a plan
-
Gareth
- Posts: 4959
- Joined: Thu Mar 10, 2005 12:19 pm
- Location: The Moon
Post
by Gareth » Wed May 23, 2007 7:38 am
thinfourth wrote:kenny wrote:Probably only need one that will survive an MOT in a weeks time.
gareth has a set of rubber for an exige in his shed
I may be coming down to grab some passenger laps
there maybe a plan
Nearly new T1-Rs though.
Gorrie has first dibs on them.
Paul, are you taking the landy down? May need the Thinfourth courier service

-
thinfourth
- Posts: 3177
- Joined: Tue Mar 15, 2005 12:06 pm
- Location: Playing in the mud near aberdeen
Post
by thinfourth » Wed May 23, 2007 8:23 am
probably taking helens disAstra
-
tonyg
- Posts: 1147
- Joined: Mon Apr 16, 2007 5:06 pm
- Location: Now with half an engine
Post
by tonyg » Wed May 23, 2007 9:48 am
I can take some bits down from Aberdeen if they are small (or paul can tie wrap them to my roll bar) - i've got a 7.
-
ed
- Posts: 9677
- Joined: Sun May 15, 2005 12:33 pm
Post
by ed » Wed May 23, 2007 10:26 am
My car is fecked and Tom is using his so im no longer doing this!
Have a great one guys!

Octopus Energy Referral Code (£50 each!) share.octopus.energy/light-lynx-588